20W Air cleaner in duct installation
Product performance description
- 95% filtration efficiency
- 80% energy recovery
- Easy installation
- Air purification: a creative technique of air purifying and
bacterium killing using electrostatic precipitator with cleaning
efficiency up to 95%, which purifies incoming air and ensure
indoors air clean
- Advanced air purification, 99% purification
- Energy recovery: ERV (Energy Recovery Ventilators) energy recovery
technology is adopted to retain the energy of output air in the
exchanger and inject fresh air to keep the consistent room
temperature; its working principle is like to air conditioner but
it is superior as an energy-saver; moreover, the two heaters inside
the unit can sense the temperature of incoming air and
automatically heat it when the temperature is lower than 12°C or
6°C, which can be set by user
- Environment protection and energy saving: the dust and dirty
particles in the air are precipated by the unit, so that protect
the environment better; the heat exchange rate is not less than 75%
- It contributes to the environment protection and avails users of
more economic and comfortable living environment
- Ultra-low noise level: the fans used in the unit, possessing of
perfect structure and muffler technology, work efficiently with
lower noise
- Easy installation: unique and creative rear installation
- Flexible and suitable in both new and present rooms; available
installation at any time
- Convenient and safe to use
► SPECIFICATION
| NAME | Air cleaner in duct installation |
| FRESH AIR VOLUME | 100m3/h |
| PURIFYING RATE | PM2.5-99.9% |
| POWER | 220V/50HZ |
| MAX. POWER | 20 W |
| WEIGHT | 30 Kg |
| APPLICABLE AREA | 61m2 |
| AIR SUPPLY MODE | Direct air supply |
► SIZE
► ADVANTAGE
★ PM2.5 removal effect diagram
solubility
minute 10 20 30 40 50 60 minute 10 20 30 40 50 60
When the machine is started for 1 hour, PM2.5 decreases by about 25
ug / m3, which is the high quality air standard, formaldehyde drops to
about 0.3 mg / m3
★ Efficient filtration
Primary filter
Large filtration area and large dust capacity
The spreading area of primary filter is about 3 m3,It can filter large particles,
block mosquitoes, hair, etc.
Characteristic:
The primary filter is made of fiber cotton,It has the
characteristics of large filtering area, large dust capacity, low
wind speed and low resistance. The service life of the follow-up
filter screen depends on this layer.
Medium efficiency filter
More than 97% of PM2.5 was filtered at one time
High efficiency filter
H13 medical grade filter screen, single filtration 99.95% PM2.5
Characteristic:
PTFE composite filter element is adopted,compared with the
traditional glass fiber, PTFE filter paper will not emit chemical
gas
The spreading area of primary filter is about 30 m3,depending on the service environment, it is generally replaced
within 1-2 years.
Protect the health of you and your family
Eliminating visible and invisible air pollution
Pet hair Urban waste Pollen PM2.5 Second hand Viral Formaldehyde
gas smoke bacteria
Special fan
Big wind wheel Low speed Low noise Long service life
► Fresh air and exhaust air use one brushless DC motor
► The wind wheel and impeller is designed, moulded and processed by
our company.
We can control the quality effectively.
► Wind wheel is 2.5 times larger than other brands.
► It has the characteristics of high efficiency, low noise, large
air volume and stable operation.
special volute big air volume DC brushless special volute
wind wheel motor
