130W Wall mounted recovery energy ventilation removal of PM2.5 duct
odor
Wall Mounted Energy Recovery Ventilator (ERV)
Ductless Energy Recovery Ventilator
The Wall Mounted Energy Recovery Ventilator allows for efficient
fresh air ventilation in situations where ducted units cannot be
used. The ERV can be located anywhere on an external wall and is
designed for simple installation.
Features
- The option of sensible-only or enthalpy type heat exchangers.
- Integrated supply air and exhaust air fans.
- Integrated filters.
- DC brushless motor, energy saving.
► SPECIFICATION
| NAME | Wall mounted recovery energy ventilation |
| FRESH AIR VOLUME | 380m3/h |
| PURIFYING RATE | PM2.5-99.9% |
| POWER | 220V/50HZ |
| MAX. POWER | 130 W |
| WEIGHT | 70 Kg |
| APPLICABLE AREA | 80-100 m2 |
| AIR SUPPLY MODE | Direct air supply |
► SIZE
► ADVANTAGE
★ PM2.5 removal effect diagram
solubility
minute 10 20 30 40 50 60 minute 10 20 30 40 50 60
When the machine is started for 1 hour, PM2.5 decreases by about 25
ug / m3, which is the high quality air standard,
formaldehyde drops to about 0.3 mg / m3
★ Efficient filtration
Primary filter
Large filtration area and large dust capacity
The spreading area of primary filter is about 3 m3,It can filter large particles,
block mosquitoes, hair, etc.
Characteristic:
The primary filter is made of fiber cotton,It has the
characteristics of large filtering area, large dust capacity, low
wind speed and low resistance. The service life of the follow-up
filter screen depends on this layer.
Medium efficiency filter
More than 97% of PM2.5 was filtered at one time
High efficiency filter
H13 medical grade filter screen, single filtration 99.95% PM2.5
Characteristic:
PTFE composite filter element is adopted,compared with the
traditional glass fiber, PTFE filter paper will not emit chemical
gas
The spreading area of primary filter is about 30 m3,depending on the service environment, it is generally replaced
within 1-2 years.
