130W Wall mounted Energy recovery ventilator Air recuperator wall
Heat recovery ventilation HRV
Energy recovery ventilation (ERV) is the energy recovery process of
exchanging the energy contained in exhausted building air and using
it to treat (precondition) the incoming outdoor ventilation air.
Features
– Low noise and high energy recovery efficiency.
– It is environment-friendly.
– The product is light and easy to install.
– Energy recovery ventilator equipment
– Domestic ventilation unit
– Hepa filter (40T)
– Bypass mode
– Energy saving
Our Energy recovery ventilators are designed to force in fresh
filtered air from outside. At the same time extract the stale, damp
air from within your home. Our heat exchanger will recover energy
from the outgoing to air to warm or cool the incoming fresh air
depending on the season.
► SPECIFICATION
| NAME | Wall mounted recovery energy ventilation |
| FRESH AIR VOLUME | 380m3/h |
| PURIFYING RATE | PM2.5-99.9% |
| POWER | 220V/50HZ |
| MAX. POWER | 130 W |
| WEIGHT | 70 Kg |
| APPLICABLE AREA | 80-100 m2 |
| AIR SUPPLY MODE | Direct air supply |
► SIZE
► ADVANTAGE
★ PM2.5 removal effect diagram
solubility
minute 10 20 30 40 50 60 minute 10 20 30 40 50 60
When the machine is started for 1 hour, PM2.5 decreases by about 25
ug / m3, which is the high quality air standard,
formaldehyde drops to about 0.3 mg / m3
★ Efficient filtration
Primary filter
Large filtration area and large dust capacity
The spreading area of primary filter is about 3 m3,It can filter large particles,
block mosquitoes, hair, etc.
Characteristic:
The primary filter is made of fiber cotton,It has the
characteristics of large filtering area, large dust capacity, low
wind speed and low resistance. The service life of the follow-up
filter screen depends on this layer.
Medium efficiency filter
More than 97% of PM2.5 was filtered at one time
High efficiency filter
H13 medical grade filter screen, single filtration 99.95% PM2.5
Characteristic:
PTFE composite filter element is adopted,compared with the
traditional glass fiber, PTFE filter paper will not emit chemical
gas
The spreading area of primary filter is about 30 m3,depending on the service environment, it is generally replaced
within 1-2 years.
